Medium Duty

(Capacity Up To 1000 lbs) An economical alternative for 2" face wheels. Hardened raceway for strength and durability. Corrosion-resistance zinc plated finish. Zerk Fittings in swivel bearings. Legs welded by machine for uniform consistency and strength. Wide selection of wheels for wide selection for applications. Swivel radius is set for maximum maneuverability under a full load.

	Phenolic Medium Duty Casters Casters are molded of heavy macerated or chopped cotton denim, impregnated with phenolic resin and formed in close fitting molds under high pressure and temperature. They are non-marking and excellent load carriers. Sizes Available: (3-1/4”, 4”, 5”, 6”, 8”)

	Polyolefin Medium Duty Casters These Polyolefin casters give you extra strength. They have precision king pin engineered for thrust absorption and durability. The axel and the nut are specifically designed for the wheel itself. Also these Polyolefin casters are zinc plated. Sizes Available: (4”, 5” 6”, 8”)

	Polyurethane Medium Duty Casters Composed of a polyurethane elastomer, open cast or injection molded, on clean, close tolerance cores. Polyurethane tread is chemically bounded to case iron core. High capacity polyurethane protects floors, is non-marking and delivers quieter operation than standard metal casters. Sizes Available: (3-1/4”, 4”, 5”, 6”, 8”)

	Rubber Medium Duty Casters Cushion rubber treads are vulcanized to cast iron cores. The soft rubber tread affords a cushion effect to the load. These casters are highly shock absorbing and provide a quiet operation, while dampening vibration. Sizes Available: (4”, 5” 6”, 8”)

	Solid Elastomer Medium Duty Casters Designed specifically for high capacity manual applications involving chemical solvents or water. Extremely low rolling resistance provides the ergonomic qualities you demand. One piece construction affords freedom from tread separation with an exceptionally long life. Non-marking floor protective tread. Sizes Available: (4”, 5” 6”, 8”)

	Steel Medium Duty Casters Premium cast iron, sometimes referred to as semi-steel, offers the highest tensile strength in the industry (30,000 psi). A cost effective solution for high capacity applications. Sizes Available: (4”, 5” 6”, 8”)

	V-Grooved Steel Medium Duty Casters Caster Face and "V"-groove are machined from heavy duty cast iron. A relief groove at the base of the "V" tends to equalize the load to each face of the angle track when in operation. Caster face and bore are machined for concentricity proper tracking. These casters can be not only on track but flat surfaces as well. V-Grooved Steel Casters are a feature for a larger bore for greater capacity. Sizes Available: (4”, 5” 6”)