Replacement Parts

Roller Bearings
Typically straight roller bearings consist of a cage-type roller assembly and a split outer race sleeve.  These bearings turn on hardened and ground spanner bushings which provide a long wearing precision inner race.  To hold the bearings in the wheel, press fit combination retainer/thrust washers hold the bearings in place.
Sizes Available: (¾”, 1”,1-1/4”)
Stainless Steel Sizes Available: (3/4”, 1”)

Axles
Listed on our shopping site are the most common axles used throughout the caster and wheel industry.  Axle length is measured underneath the head of the bolt.  Axles are either plain or zerked.  A zerked axle has a recessed grease fitting pressed into the unthreaded head of the bolt and is a simple way to lubricate the bearing in the wheel itself.
Sizes Available :( 2-3/16”, 3”, 3-1/2”, 4”, 4-1/4”, 4-1/2”)
Stainless Steel Sizes Available (3-1/2”)

Quick Release Caster pads
make changing casters fast and easy. You can install or replace casters with just one nut and bolt. The pads are unplated for easy welding to carts. Two standard sizes are available.
Sizes Available:(4” X 4-1/2”, 4” X 6-1/4”)

Floor Locks
prevent portable equipment from shifting or creeping when in the locked position.  Engaging the floor lock is accomplished by depressing the foot pedal.  Depressing the kick bar releases or retracts the floor lock.  For best results under most conditions, floor locks should be installed in pairs between swivel and rigid casters.  It is possible to maintain adequate locking if mounted between two swivel casters.
Sizes Available(4”, 5”, 6”,8”)

Spanners
Hardened and ground spanner bushings are a simple way to reduce the bearing size to the proper inner dimension of the axle that your fork or fixture requires.
Sizes Available:(3/8”,1/2”,3/4”,1”)
Stainless Steel Sizes Available: (1/2”)

Washers
Are available in metal and plastic configurations. Straight roller bearings have high radial capacity, but minimal side thrust load rating
Sizes Available: ( ¾, 1”,1-1/4”)